Skip to Content To homepage

BATH 230

AC Circulator

The Bath 230 consists of a 230-Volt AC submersible aquarium pump with a Euro-style plug on the power cord, a bucket and a coil of 1/8-inch ID vinyl tubing. A fitting is placed on the outlet to accommodate the tubing. The bucket has a tight-fitting lid with three holes. The holes have grommets to hold the inlet tube, outlet tube and electrical cord. The hole for the electrical cord is split to permit passage of the cord.

The Bath 230 is provided with products such as the qpod 2e that do not use a TC 1 Temperature Controller and must be used on AC power with voltages in the range of 220 to 240. We recommend the use of an algicide to prevent the growth of unsightly organisms that could potentially limit flow. (We do not provide algicide due to the expense of shipping chemicals.)

Back to top